Press and hold the INFO button. After that, press and hold that button to make the spanner flash. Release and then press the INFO button again. Next, you need to press the INFO button again and you’ll see CLEAR come up on the dash. Start your car. Start the engine to verify the indicator has been reset.
Turn on the switch ignition without starting the engine. Go to TRIP A by pressing the DISP button repeatedly. Next, turn the switch off. Press and hold the DISP button while turning back on the ignition. Continue to hold down the DISP button until the maintenance light go away.

To reset the maintenance light on a 2000 Honda Accord, you will need to: Put the key in the ignition (but don’t turn on the car) and press the Select/Reset switch on the dashboard. Hold the button and turn on the vehicle. Don’t start the car. Hold the switch for at least 10 seconds until you see the maintenance indicator reset.

Oil Light Reset Via Navigation Display. The second way to do the maintenance reset is by the center screen. Follow the instructions below to do so: Get in the car and turn on the ignition. Hit the MENU button to enter the main menu. Go to SETUP. Select VEHICLE and then select MAINTENANCE. camperman. 19647 posts · Joined 2012. #4 · Feb 22, 2016. • Turn the ignition switch to the ON position. (Do not start the engine.) • Press and release the brake pedal two times. • Fully depress the accelerator pedal slowly two times within 10 seconds. • Turn the ignition switch to the OFF/LOCK position. Press and hold the “ Trip ” or “ Disp ” button. Continue to hold the “ Trip ” or “ Disp ” button while turning the ignition of the vehicle on. On push button models, press the Engine Start button two times. Do not start the engine. When the odometer displays all zeros, it will confirm the maintenance light has been reset. STEP 4. Then Hold Odo/Trip Reset Button, Then Press The “ ENGINE START STOP BUTTON ” Twice or Turn Ignition ON only, Don’t Release The Odo/Trip Button, Until The RESETTING OIL MAINTENANCE DATA or “ 000000 ” is displayed.
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out. Once the maintenance light is off, let go of the odometer button, and turn the
Go to your touchscreen and search through the MAZDA CONNECT™ infotainment applications menu. Select “Vehicle Status Monitor” from the application menu. Click “maintenance” and then navigate to “Oil Change.”. From there, tap the “Reset” button from the oil change menu. After this, the light should begin the process of resetting. 7vBT.
  • chd962j66u.pages.dev/724
  • chd962j66u.pages.dev/437
  • chd962j66u.pages.dev/27
  • chd962j66u.pages.dev/755
  • chd962j66u.pages.dev/331
  • chd962j66u.pages.dev/7
  • chd962j66u.pages.dev/278
  • chd962j66u.pages.dev/963
  • chd962j66u.pages.dev/219
  • chd962j66u.pages.dev/878
  • chd962j66u.pages.dev/632
  • chd962j66u.pages.dev/550
  • chd962j66u.pages.dev/108
  • chd962j66u.pages.dev/477
  • chd962j66u.pages.dev/441

    • how do you reset the maintenance light